Common AnyTone Issues and Helpful Info

Using a Previous AnyTone Code Plug
The following video guide shows you how to successfully export and convert your existing code plug from your existing AnyTone so that it will work on your n...
Thu, 21 May, 2020 at 4:09 PM
Installing the AnyTone CPS Program
Installing CPS If you are needing assistance with the installation of your CPS software, please see the following step-by-step support video: https://w...
Tue, 21 Jul, 2020 at 10:44 AM
Resolving a Band Error on the AnyTone
Band errors are typically caused by one of the following issues: 1. Attempting to use an older code plug which was written in an earlier version of CPS ...
Thu, 21 May, 2020 at 5:01 PM
AnyTone CodePlug Creation and Troubleshooting for Beginners
Beginner Code Plug Guide If you are having difficulty programming in your first DMR code plug, we do have an excellent step by step guide that is taken ...
Tue, 21 Jul, 2020 at 10:59 AM
Converting AnyTone Code Plugs for your New Radio Tutorial Video
Converting an old code plug https://www.youtube.com/watch?v=DcvRmOZRUNc&t=11s  
Tue, 21 Jul, 2020 at 11:02 AM
AnyTone Firmware Update Tutorial and Video
It is important to realize that radios are not like PC's. They do not need to have an update done to the FirmWare unless there is something wrong with ...
Tue, 20 Apr, 2021 at 1:51 PM
AnyTone - Setting CPS Options after CPS Install
Make sure you set your CPS options after any CPS install. Go to Tool - Options - Set Annex Functions Pictures below.
Tue, 21 Jul, 2020 at 11:47 AM
AnyTone Squelch Settings
You can find the Squelch settings in the CPS -> Optional Settings -> Other tab.  Set to at least Level 1 or Level 2. If these are set to Zero, ful...
Tue, 21 Jul, 2020 at 11:55 AM
AnyTone and FlexRadio Driver Conflict
Tech Support Note - AnyTone and Flexradio Virtual Drivers I have had no success loading the AnyTone USB Com drivers when a Flexradio is installed on a P...
Tue, 21 Jul, 2020 at 11:57 AM
AnyTone Professional Mode
For law enforcement and commercial/insustrial functions, the radio must be set to "professional mode" instead of "amateur mode".  The ra...
Tue, 21 Jul, 2020 at 12:02 PM